Table of Contents
Advertisement
High speed riser module
Figure 113: High speed riser module (A3C40233545)
9.3
Replacing a high speed riser module
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ If applicable, remove the server nodes from the server enclosure, see
"Removing server nodes from the server enclosure" on page
▶ If applicable, remove the front bezel, see
page
48.
▶
"Extending the server enclosure out of the rack" on page
▶
"Removing the top covers" on page
▶
"Locating the defective component" on page
150
41.
54.
Upgrade and Maintenance Manual
Hardware: 5 minutes
39.
42.
"Removing the front bezel" on
49.
40.
43.
CX400 M6
Advertisement
Table of Contents
