Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual page 47

Left view
Figure 8: Installing the front bezel brackets
▶ Insert the brackets on the right and left side of the chassis front as shown
(1).
▶ Fasten one screw on each side (see circles).
Installing this bracket should only be done if the front bezel is installed
for the first time.
Installing the front bezel
Figure 9: Installing the front bezel brackets
▶ Insert the hook of the front cover into the hole of the right bracket (1).
▶ Press the latch on the left side of the front cover (2).
▶ Insert the front cover into the bracket on the left side (3).
CX400 M6 Upgrade and Maintenance Manual
Basic hardware procedures
Right view
47