Removing The Server Enclosure From The Rack - Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual

Basic hardware procedures
Figure 11: Extending the server enclosure out of the rack
▶ If the chassis is secured to the rack with screws, remove the screws (1).
▶ While pressing the locking levers (2) on both sides of the enclosure use the
brackets (3) to pull the enclosure out of the rack.
▶ Pull the server enclosure out of the rack until it locks in place.
CAUTION
▶
Do not use the extended server enclosure as a surface on which
to put things or as a work surface, and strictly avoid leaning on or
against it.
4.7.3

Removing the server enclosure from the rack

In most cases maintenance tasks can be performed while the server
enclosure is extended from the rack. However, depending on
accessibility or security guidelines, it may make sense to completely
remove the server enclosure from the rack cabinet for maintenance
purposes.
50 Upgrade and Maintenance Manual CX400 M6