6�1�5�- Calculation Periods - Circutor Line-CVM-D32 Instruction Manual

line-CVM-D32
ARON, Three-phase mains measuring with 3-wire connection and transformers with ARON connec-
tion.
To validate the option, hold down key
Use key to skip to the next programming point.
6�1�5�- CALCULATION PERIODS
This screen enables configuration of device calculation periods.
Hold down key to set the aggregation period, i.e. measurement integration period
.
PERIOD)
to set the integration period for maximum demand calculation
Hold down key
Use keys and to modify the digit's value.
Press key to skip through the digits.
Hold down key to validate the value.
 Aggregation period:
Minimum value: 1 minute.
Maximum value: 60 minutes.
Note: The programmed value must be divisible by 60, i.e. the division 60 / Aggregation period must
be exact.
 Maximum demand integration period:
Minimum value: 1 minute.
Maximum value: 60 minutes.
Use key to skip to the next programming point.
Instruction Manual
.
AGGREGATION PERIOD
15
min
PD PERIOD
15
min
MEASURE
SETUP
(AGGREGATION
.
(PD PERIOD)
47