Safe Torque Off; Danfoss Vlt ® Flexconcept - Danfoss VLT AutomationDrive FC 301 Series Design Manual

Product Features

4.2.15 Safe Torque Off

For information about Safe Torque Off, refer to the VLT
Series Safe Torque Off Instruction Manual.
4.3 Danfoss VLT
4 4
Danfoss VLT
and cost-efficient adjustable frequency drive solution,
mainly for conveyors. The concept consists of the VLT
OneGearDrive
®
302 or VLT
OneGearDrive is basically a permanent magnet motor with
a bevel gear. The bevel gear can be delivered with
different gear ratios.
P1
Figure 4.8 OneGearDrive
The OneGearDrive can be driven by VLT
FC 302 and VLT
power sizes dependent on demands of the actual
application:
•
0.75 kW
•
1.1 kW
•
1.5 kW
•
2.2 kW
•
3.0 kW
When [1] PM, non-salient SPM has been selected in in
either FC 302 or FCD 302, the OneGearDrive can be
selected in 1-11 Motor Model, and the recommended
parameters are set automatically.
For further information, refer to the VLT
FC 301/FC 302 Programming Guide, the VLT
Selection Guide, and www.danfoss.com/BusinessAreas/Drives-
Solutions/VLTFlexConcept/
48
® ®
FlexConcept
® ®
FlexConcept is an energy efficient, flexible
® ®
driven by the VLT AutomationDrive FC
Decentral Drive FCD 302.
P2
®
®
Decentral Drive FCD 302 in the following
®
Design Guide
®
FC
®
P3
AutomationDrive
AutomationDrive
®
OneGearDrive
Rev. 2014-04-04 All rights reserved. MG33BF22