Danfoss VLT AutomationDrive FC 301 Series Design Manual page 94

How to Order
Description
RFI filter
Brake
Display
7 7
Coating PCB
Line power
option
Adaptation
Adaptation
Software
release
Software
language
1) : FC 301/enclosure type A1 only
2)
US Market only
3)
: A and B3 frames have load sharing built-in by default
Table 7.1 Ordering Type Code Enclosure types A, B and C
92
Design Guide
Pos Possible choices
16-17 Hx: No EMC filters built in the adjustable frequency drive (600 V units only)
H1: Integrated EMC filter. Fulfill EN 55011 Class A1/B and EN/IEC 61800-3 Category 1/2
H2: No additional EMC filter. Fulfill EN 55011 Class A2 and EN/IEC 61800-3 Category 3
H3:
H3 - Integrated EMC filter. Fulfil EN 55011 class A1/B and EN/IEC 61800-3 Category 1/2
(Enclosure type A1 only)
H4: Integrated EMC filter. Fulfill EN 55011 class A1 and EN/IEC 61800-3 Category 2
H5: Marine versions. Fulfill same emissions levels as H2 versions
18 B: Brake chopper included
X: No brake chopper included
T: Safe Stop No brake
U: Safe stop brake chopper
19 G: Graphical Local Control Panel (LCP)
N: Numerical Local Control Panel (LCP)
X: No Local Control Panel
20 C: Coated PCB
R: Ruggedized
X: No coated PCB
21 X: No line power option
1: Line power disconnect
3: Line power disconnect and Fuse
5: Line power disconnect, fuse and load sharing2,
7: Fuse
8: Line power disconnect and load sharing
A: Fuse and load sharing 2,
D: Load sharing
22 X: Standard cable entries
O: European metric thread in cable entries (A4, A5, B1, B2, C1, C2 only)
S: Imperial cable entries (A5, B1, B2, C1 and C2 only)
23 X: No adaptation
24-27 SXXX: Latest release - standard software
28 X: Not used
Rev. 2014-04-04 All rights reserved.
1)
1)
1)
2)
2)
3)
3)
3)
3)
MG33BF22