Cleaning Payout Senor System; Cleaning Filling Level Sensor System - CPI GRYPHON User Manual

7. Reinstall the validator cover.
8. Reinsert validator assembly in coin changer until it is seated properly.
9. Turn ON power to vending machine.

Cleaning Payout Senor System

If you continue to receive cleaning notifications, or the changer has difficulty paying out, the
payout sensor system is likely soiled and requires cleaning.
Steps
Turn OFF power to vending machine before cleaning coin changer.
Risk of electric shock, electrostatic discharge, and machine/component damage.
1. Turn OFF power to vending machine.
2. Remove the coin changer from the vending machine.
3. Remove the cassette.
4. Grab under the middle payout disc and press the disc out from the payout set from
the bottom.
5. Press out the left and right discs in the same fashion.
6. Clean the discs with a dry cloth.
7. Clean the sensors with a dry brush or dry toothbrush.
8. Reinstall payout discs, being careful to return them to their original alignments.
9. Reinsert coin cassette.
10. Reinstall the coin changer into the vending machine.
11. Turn ON power to vending machine.

Cleaning Filling Level Sensor System

If the coin changer reports incorrect tube levels, check the filling level sensors and run an
auto self-test. This is best done with an empty coin cassette.
Gryphon
™
© 2021 Crane Payment Innovations.
All rights reserved.
Coin Changer User Guide
EN 33