Optional Accessories; Sd Card Format - Racelogic VBOX Touch V2 User Manual

Product Code
RLACS262
RLACS331
RLACS281

Optional Accessories

Product Code
RLVBACS004
RLVBACS010
RLCAB001
SD Card
VBOX Touch logs data to an SD card. Depending on the Logging Strategy that is set in the
unit will either log continuously or when movement is detected (default).

SD Card Format

VBOX Touch is supplied with an 8 GB SDHC card in a FAT32 file format, which is the only file format supported.
If you are looking to purchase a new SD card, it is recommended that any card used has a write speed of above 7 MB/s
(4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum). Racelogic recommends SD cards from
quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results.
IMPORTANT
If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into a FAT32 file
system before it will work with a VBOX Touch unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format is supported by VBOX Touch.
Quantity
1
1
1
Description
Brake Pedal Trigger
Hand Held Start/Stop Logging Switch
VBOX PC Serial Cable
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V2/
User_Guide_%E2%80%93_VBOX_Touch_V2/01_Getting_Started_%E2%80%93_VBOX_Touch_V2
Description
GNSS Antenna (3 m)
Swivel Neck Richter Suction Mount
Plastic Carry Case for VBOX Touch
(not supplied with RLVBTOUCH-
M for Motorsport customers)
General Settings area, the
3