Table of Contents
Advertisement
Quick Links
VBOX Touch Speed Mode - Quick Start Guide
VBOX Touch features a 10 Hz GNSS receiver and a responsive colour touchscreen. The Speed Mode allows you to
view live speed data, selectable via 3 screens; Speed, VMAX and Average Speed.
Registration
Please register your VBOX Touch so that Racelogic can
continue to provide you with notifications about the latest
software releases and firmware upgrades for your
Racelogic product, and offer technical support.
Register your device here.
What is in the box?
When you purchase a VBOX Touch Motorsport V1 (RLVBTOUCH-M), you will find the following items when you open
the box:
Product Code
VBTOUCH-V1
MECH0298SD
Quantity
1
1
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide
Description
VBOX Touch Unit
Rubber Overmould - Black
1
Advertisement
Table of Contents
Related Manuals for Racelogic VBTOUCH-V1
Summary of Contents for Racelogic VBTOUCH-V1
- Page 1 VBOX Touch features a 10 Hz GNSS receiver and a responsive colour touchscreen. The Speed Mode allows you to view live speed data, selectable via 3 screens; Speed, VMAX and Average Speed. Registration Please register your VBOX Touch so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product, and offer technical support.
-
Page 2: Optional Accessories
If you are looking to purchase a new SD card, it is recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum). Racelogic recommends SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results. - Page 3 The VBOX Touch unit is powered by a power cable that is unterminated so that you can make a bare-wire connection to a power supply. The cable terminates in a 2-way connector that mates with the Power socket on VBOX Touch. On boot-up, the VBOX Touch will display a splash screen and automatically look for satellites and media. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
- Page 4 If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before removing the card. Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the car is stationary. Always check the Record Icon before ejecting the card. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
- Page 5 GNSS only; 2 = DGNSS. • Event 1 time: This is the digital input oversample timer used to interpolate the trigger event time between captured samples. You can find more information about the VBO file format here Connectors https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
- Page 6 VBOX Test Suite via an RLCAB001 and conduct live testing, or output lap timing parameters. You can find more information about the Serial Output settings here. You can find more detailed connector information on the PIN OUTS page. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
-
Page 7: Satellite Reception
The placement of the GNSS antenna is crucial to the quality of the data recorded by VBOX Touch. Any metal close to a GNSS antenna can unpredictably disturb the signal due to interference from reflections of weak GNSS signals. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide... - Page 8 Tall buildings or trees can block GNSS signals, causing a reduction in the number and quality of satellites being tracked, leading to inaccurate position measurements and a noisy velocity signal. GNSS works best in open areas/ Avoid tree-lined roads https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
-
Page 9: Gps Coldstart
The 4 LEDs at the top of the unit provide visual feedback dependent on what process is being performed: Function Behaviour Colour If Alert at End is enabled, the LEDs Accel/Decel Mode will flash green for 0.5 s once the test end criteria are met. Lap Timing Mode The LEDs provide a live reference https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide... - Page 10 25% of the process with all LEDs extinguishing when the process is complete. When a Track Layout is changed, the LEDs will briefly flash green twice. When a Finish Line is cleared, the LEDs will briefly flash green twice. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
- Page 11 If a screenshot has been saved successfully, the LEDs will illuminate Screenshot yellow in sequence from left to right to display the progress of writing to the SD card. The LEDs will briefly Reset flash green twice when a screen has been reset. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
-
Page 12: Screen Overview
Vmax screen example Setup 1. Connect the power via the Power socket. 2. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green as long as the card has free space. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide... - Page 13 7. Select which Speed display you would like to be shown (Speed, VMAX or Average Speed) by selecting the Forward and Back arrows on the bottom right of the screen or by swiping the screen left or right. Speed Vmax Average Speed https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
- Page 14 Test Suite or output lap timing parameters, go to Serial Output within the Serial Port Settings and change the Output Mode to either VBOX Stream (live testing with VBOX Test Suite) or Lap Timing. Note: Ensure correct hardware connections are made. 12. Press the Exit Button to return to the Speed screen. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
- Page 15 18. A screenshot of what is displayed on the screen can be taken at any time by pressing the Screenshot Button. 19. To reset all results shown on the current screen, press the Reset Button. More information on the Speed Mode can be found here. https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V1/ Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...
- Page 16 Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/VBOX_Touch_Speed_Mode_-_Quick_Start_Guide...