Table of Contents
Advertisement
VBOX Touch V2 - Accel Mode
The Acceleration Mode allows you to perform acceleration tests using pre-defined configurations, or using your own
specified values. It is also possible to display up to 4 concurrent test results on the screen. It is accessed by pressing the
Mode Button
at the bottom of the screen and selecting Accel.
The last selected Acceleration test will be displayed after each power cycle. It is possible to choose from either Speed or
Distance parameters to start and end the test. Test results displayed on the screen of the VBOX Touch will remain on
screen at the end of the test until the next start condition is met.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V2/
User_Guide_%E2%80%93_VBOX_Touch_V2/05_Display_Modes_%E2%80%93_VBOX_Touch_V2/VBOX_Touch_V2_-
_Accel_Mode
23
Advertisement
Table of Contents
Need help?
Do you have a question about the VBOX Touch V2 and is the answer not in the manual?
Questions and answers