Racelogic VBOX Touch V2 User Manual page 31

Hide thumbs Also See for VBOX Touch V2:

Table of Contents

To return to the main screen, select the Exit Button

on the bottom left.

Alert at End/Target

By default, an audible and visual alert signals when either the test end criteria, or the target speed is met within a

0-Speed-0 test. The VBOX Touch will beep and the 4 LEDs across the top of the device will flash

green

for 0.5 s. Tap

the button to disable.

Note: This setting will only apply to the Primary Test.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V2/

User_Guide_%E2%80%93_VBOX_Touch_V2/05_Display_Modes_%E2%80%93_VBOX_Touch_V2/VBOX_Touch_V2_-

_Accel_Mode

Table of Contents

Need help?

Do you have a question about the VBOX Touch V2 and is the answer not in the manual?

Vbtouch-v2