Racelogic Motorsport VBOX Touch V2 User Manual
  1. Manuals
  2. Brands
  3. Racelogic Manuals
  4. Data Loggers
  5. VBOX Touch Motorsport V2
  6. User manual

Racelogic Motorsport VBOX Touch V2 User Manual

Hide thumbs Also See for Motorsport VBOX Touch V2:
Table of Contents

Advertisement

Quick Links

Download this manual
Motorsport VBOX Touch V2 User Guide
•
01 Getting Started – VBOX Touch (v2/v3)
•
02 Installing VBOX Touch (v2/v3) in Your Vehicle
•
03 LED behaviour – VBOX Touch (v2/v3)
•
04 Screen Layout – VBOX Touch (v2/v3)
•
05 Display Modes – VBOX Touch (v2/v3)
•
Accel Mode - VBOX Touch (v2/v3)
•
Decel Mode - VBOX Touch (v2/v3)
•
Lap Timing Mode - VBOX Touch (v2/v3)
•
Speed Display Mode - VBOX Touch (v2/v3)
•
06 Settings – VBOX Touch (v2/v3)
•
CAN Bus - VBOX Touch (v2/v3)
•
Pinouts - VBOX Touch (v2/v3)
•
RS232 Output - VBOX Touch (v2/v3)
•
Technical Specification - VBOX Touch (v2/v3)
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Motorsport VBOX Touch V2 and is the answer not in the manual?

Questions and answers

Related Manuals for Racelogic Motorsport VBOX Touch V2

Summary of Contents for Racelogic Motorsport VBOX Touch V2

  • Page 1 Motorsport VBOX Touch V2 User Guide • 01 Getting Started – VBOX Touch (v2/v3) • 02 Installing VBOX Touch (v2/v3) in Your Vehicle • 03 LED behaviour – VBOX Touch (v2/v3) • 04 Screen Layout – VBOX Touch (v2/v3) •...

  • Page 2: What Is In The Box

    01 Getting Started – VBOX Touch (v2/v3) Registration Please register your VBOX Touch so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product, and offer technical support. Register your device here.

  • Page 3: Optional Accessories

    If you are looking to purchase a new SD card, it is recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed class of 10 (4 absolute minimum). Racelogic recommends SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results.
  • Page 4 The VBOX Touch unit is powered by a power cable that is unterminated so that you can make a bare-wire connection to a power supply. The cable terminates in a 2-way connector that mates with the Power socket on VBOX Touch. On boot-up, the VBOX Touch will display a splash screen and automatically look for satellites and media. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/01_Getting_Started_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 5 If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before removing the card. Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the car is stationary. Always check the Record Icon before ejecting the card. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/01_Getting_Started_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 6 GNSS only; 2 = DGNSS. • Event 1 time: This is the digital input oversample timer used to interpolate the trigger event time between captured samples. You can find more information about the VBO file format here https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/01_Getting_Started_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 7 The port can also be used to connect a Hand Held Start/ Stop Logging Switch (RLVBACS010) to control the logging of the unit. More information on this is available here. CAN/Serial The top CAN/Serial port can be used to output serial information, allowing you to either connect VBOX Touch https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/02_Installing_VBOX_Touch_(v2%2F%2Fv3)_in_Your_Vehicle...

  • Page 8: Satellite Reception

    However, if you are struggling to maintain a stable satellite lock (indicated by a flashing red satellite icon), you can use the external antenna (RLACS262) supplied https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/02_Installing_VBOX_Touch_(v2%2F%2Fv3)_in_Your_Vehicle...
  • Page 9 If this is not possible, copper or aluminium foil can be used to create a shaped ground plane underneath the antenna. For example, on a fibreglass roof, mount the antenna on top of the roof, and place some adhesive-backed metal foil underneath, on the inside of the roof. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/02_Installing_VBOX_Touch_(v2%2F%2Fv3)_in_Your_Vehicle...

  • Page 10: Gps Coldstart

    If VBOX Touch is struggling to acquire a satellite lock, a GPS coldstart may be required. This may be necessary when the unit hasn’t been used for several days or has dramatically moved location since its last use. To perform a coldstart, press the COLDSTART button within the Diagnostics Settings menu. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/02_Installing_VBOX_Touch_(v2%2F%2Fv3)_in_Your_Vehicle...
  • Page 11 3. The number of satellites will then be displayed as '00' and GPS status will show ‘SEARCHING FOR SATELLITES’ until the satellite lock has been acquired. It will take approximately 25 to 30 seconds for the unit to reacquire the satellite lock. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/02_Installing_VBOX_Touch_(v2%2F%2Fv3)_in_Your_Vehicle...
  • Page 12 The current lap is 2.5 km/h slower than the reference lap The current lap is > 5 km/h slower than the reference lap The LEDs will illuminate blue during the process of creating a Reference Lap. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/03_LED_behaviour_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 13 If a screenshot has been saved successfully, the LEDs will illuminate Screenshot yellow in sequence from left to right to display the progress of writing to the SD card. The LEDs will briefly Reset flash green twice when a screen has been reset. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/03_LED_behaviour_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 14 • Top of the screen (header) – indicative status information • Centre of the screen – mode and settings information (navigate by pressing the forward and back arrows or by swiping left or right) • Bottom of the screen (footer)– function buttons https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/04_Screen_Layout_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 15: Logging Status

    VBOX Touch has 4 LEDs above the display. These can flash in different colours and different frequency patterns depending on the process being performed. You can learn more about the behaviour of the LEDs on VBOX Touch here. Logging Status Record Icon will show when the unit is logging data to the SD card. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/04_Screen_Layout_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 16: Satellite Status

    The Satellite Icon illustrates whether the unit has a valid satellite lock. When a lock is acquired, this icon will be solid green. If there is no satellite lock, the icon will flash red. Display Mode The header shows which Display Mode is currently selected. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/04_Screen_Layout_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 17: Mode Data

    SD Card Icon at the top of the screen will flash 3 times and VBOX Touch will emit an audible error notification. IMPORTANT NEVER remove the SD card while a screenshot is captured and saved as it could cause the unit to crash! https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/04_Screen_Layout_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 18: Mode Button

    Forward/Back Arrow Buttons You can use the Forward and Back arrow buttons to navigate through the Display Mode and Settings screens. Alternatively, you can also swipe left or right on the screen when these buttons are visible. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/04_Screen_Layout_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 19: Exit Button

    Exit Button You can use the Exit button to return to the previous menu or page. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/04_Screen_Layout_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 20 VBOX Touch has 4 display modes; Accel, Decel, Lap Timing and Speed. The display modes allow you to conduct a range of performance tests and functions. You can change the display mode by pressing the Mode button at the bottom of the screen. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 21 • Custom test so you can define your own configurable settings. • The screen displays time, run number, distance, Peak G and altitude difference. You can easily change the units of measurement for speed and distance (metric or imperial). https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 22: Lap Timing

    • VBOX Touch also works as a highly accurate digital speedometer, a handy feature for street driving. • You can set the units to kph or mph and the display can show live speed, VMAX, average speed and distance as well as a target speed. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 23 Speed or Distance parameters to start and end the test. Test results displayed on the screen of the VBOX Touch will remain on screen at the end of the test until the next start condition is met. Speed units used are dependent on what is selected within the General Settings area. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 24: Primary Screen

    Accel Mode Overview Primary Screen This is the default acceleration screen and displays current/completed test information. If One Foot Rollout or Slope Correction is enabled within the Accel Settings, the test header text will reflect the options. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 25: Secondary Screen

    This screen displays current test information for all ranges. If One Foot Rollout or Slope Correction is enabled within the Accel Settings, the test header text will reflect the options. The screen is split into two halves: https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 26 This screen displays best test information for all ranges. If One Foot Rollout or Slope Correction is enabled within the Accel Settings, the test header text will reflect the options. The screen is split in two halves: https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 27 Accel Tests can be defined by pressing the Settings button on the bottom left of the screen and then selecting the Accel option. 4 concurrent tests can be defined, which by default are 0–60, 0–100, 0–100–0 and 0–¼ mile. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 28 Note: Accel tests can also be defined when in the Secondary Accel Screen by double-tapping on an existing test range header or result. Test Type Select the Test Type button to choose between Speed, Distance or 0-Speed-0 (e.g. 0–100–0). The parameters displayed will depend on the test chosen. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 29 You can define the start and end conditions by pressing the corresponding buttons and using the keypad presented. If you are defining a Distance test, one of the pre-set distance buttons can be selected to quickly choose the test. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_-...

  • Page 30: Result Type

    The parameters of the Primary test are displayed at the top right of the Primary Accel Mode screen. The test ranges will be remembered for future use, even if another mode is chosen. Result Type The test result type for a selected test range can be changed by tapping on the current option. Available result types include: https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 31 Accel option. It enables you to choose the test parameters and also includes other test options. Settings can be changed by pressing the corresponding button next to an option. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 32 • If Enabled, '1ft' will appear next to the Test header text on the Primary Acceleration Display Screen and 'ONE FOOT ROLLOUT' will be displayed on the right-hand side of the new session header within the Test Results. Slope Correct https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 33 • Slope correction only applies to the live display results in order to match DB Scanner third-party software post- process corrections. It is not possible to apply post-process corrections using Racelogic software programs. • Cannot be enabled if One Foot Rollout is Enabled.
  • Page 34 • Maximum speed achieved during a test run (km/h or mph) • Maximum acceleration achieved during a test run (g) • Altitude difference between the start of the test and the end of the test (m or ft) https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 35: Save Results

    (in degrees and decimal degrees format) added to the session header. Reset Selecting the Reset Button will reset all test results shown on the current screen. When pressed, the LEDs will briefly flash green twice and the unit will emit an audible confirmation notification. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Accel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 36 Test results displayed on the screen of the VBOX Touch will remain on screen at the end of the test until the next start condition is met. The applied speed units depend on the selections in the General Settings area. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 37 0.5 km/h or VBOX Touch loses the satellite lock (less than 4 satellites found), the value will • Distance travelled be displayed as 000.0. • Run number https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 38: Selecting A Test

    Selecting a Test You can access the Decel Mode settings screen by selecting the Settings button at the bottom left of the screen in Decel Mode. This is where you choose the test parameters and see other test options. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 39 You must use the external antenna when conducting a brake trigger test. Test Type: Decel If you select Decel as the Test Type, you will see preset and custom test options available on the right-hand side of the screen. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 40 • 200 – 0 (km/h or mph) • 300 – 0 (km/h or mph) • 400 – 0 (km/h or mph) When you select a test, the name will be displayed in the top right corner of the Decel Mode screen. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 41 Button at the bottom left of the screen to go back to the Decel Mode screen without saving. The name of the selected test will be displayed in the top right corner of the Decel Mode screen. The last defined https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_-...
  • Page 42 With Trigger selected as the test type, 'TRIGGER' will be used as the test header and will be displayed at the top right corner of the Decel Mode screen. When the trigger is activated, 'ON' will be displayed next to the header. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_-...
  • Page 43 Note: The maximum input value for speed is 999.9 (1 decimal place only). MFDD Settings These settings let you set up the start and end period of the Mean Fully Developed Deceleration (MFDD) analysis period. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 44 • s_01 is the distance at which the speed is v_01. • s_08 is the distance at which the speed is v_08. MFDD can be also calculated using Speed. Press the MFDD button until it reads Speed. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 45 Save the selected value by pressing the Confirm button at the bottom right of the screen, or press the Cancel button on the bottom left of the screen to return to the Settings screen without saving. Minimum/ Maximum Values From • Speed https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 46: Test History

    You can view a history of the test results by selecting the Results button at the bottom of the screen. The test results will be displayed until you choose a new test type or press the Reset button. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 47 ◦ Average deceleration achieved during test run (g or m/s²) ◦ Maximum deceleration achieved during a test run (g) ◦ Altitude difference between the start of the test and the end of the test (m or ft) https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 48: Save Results

    When this button is pressed, the LEDs will briefly flash green twice and the unit will emit an audible confirmation notification. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 49 • last lap time compared to the best lap time • session time • completed lap count You can access the Lap Timing mode by pressing the Mode button at the bottom of the screen and selecting Lap Timing. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 50 Back arrows at the bottom right of the screen or by swiping left or right. Lap Timing - Main Screen This is the default lap timing screen and it displays live lap timing information in relation to: https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 51 If the Start/Finish line has yet to be until the speed is increased or the satellite reception crossed, the circuit name/layout will be displayed is regained. If a reference lap is being created, you https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 52 Lap Timing - Basic Screen This lap timing screen displays a lap time in relation to: • A set Start/Finish Line • Separate Start and Finish Lines • A Standing Start line and separate Finish Line • A reference Lap https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 53 Lap Timing screen to display a static lap time, or will appear for 5 seconds after a lap has been completed if you have set it to display a rolling lap time. If the Start/Finish line has yet to be crossed or a lap hasn't been completed, this data will not be shown. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 54 • The vehicle must be moving >0.8 km/h and the unit must have satellite lock to be able to set a Start/Finish Line. • If the setting of the start/finish line is cancelled, any live lap prediction for the current lap will be lost and unavailable for use. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 55 Start/Finish line is crossed or it detects movement in Standing Start mode. The action will complete when the Start/Finish line is crossed again, or when the separate Finish line is crossed. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 56 Lap Timing option. It is split over 2 pages and lets you choose the lap timing parameters. You can move between the different pages by selecting the Forward and Back arrows at the bottom right of the screen or by swiping left or right. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 57: Select A Track

    Cancel button at the bottom left of the screen to return to the Lap Timing Settings screen without saving. Note: If you press the Select button when you are not in the vicinity of a known track, the unit will display a NO LIST AVAILABLE message. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 58 A separate finish line must be set if you are using Standing Start Mode. Note: The vehicle must be moving >0.8 km/h and the unit have a satellite lock to set a Finish Line. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 59 • When the finish gate is cleared, all existing lap timing values and lap history will be cleared. • If the finish line setting is cancelled, any live lap prediction for the current lap may be lost and unavailable for use. Load a Track Database https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 60 If there are splits saved in the file, these will also be uploaded to the unit (max 10 gates/splits). Note: When a new Start/Finish or Finish line gate is loaded, all existing lap timing values will be cleared and the new lap timing gates will be used. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 61 Rolling Lap Time https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 62: Standing Start

    This will ask you to wait 5 seconds before you move the vehicle. If you press the screen, move, or lose the satellite lock before the standing start activation period has expired, the feature will be cancelled. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 63 Let us use the default 5 km/h setting as an example: LEDs will show bright green The current lap is >5 km/h quicker than the reference lap LEDs will show dull green The current lap is 2.5 km/h quicker than the reference lap https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 64: Reset Data

    Reset, you will see a cancel timeout screen giving you the option to cancel the reset (within 5 seconds) by pressing the screen. After 5 seconds, the LEDs will briefly flash green twice and the unit will emit an audible confirmation notification. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 65 Cancel button on the bottom left of the screen to return to the Settings screen without saving If confirmed you will briefly see a load success screen. If there are splits stored in the file, these will also be uploaded to the unit (max 10 gates/splits). https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 66 Settings screen without saving. The default setting is 60 seconds, but you can choose between 10 and 86400 seconds. The value will be remembered after each power cycle. Note: Time can only be set in whole numbers. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 67 Lap History You can view a history of the lap results by selecting the Results button at the bottom of the screen. Lap results will display until you press the Reset button. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 68 Once Reset is selected, a cancel timeout screen will display, allowing you to cancel the reset within 5 seconds by pressing the screen. After 5 seconds, the LEDs will briefly flash green twice and the unit will emit an audible confirmation notification. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 69 Fixes/Unfixes the reference lap Resets the lap timing data, lap time history and Press and hold the Main Lap Timing Screen reference lap Sets a Start/Finish or Finish Line at the current Tap the Basic Lap Timing Screen location https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 70 The last selected Speed Display Mode will be displayed after each power cycle. Speed Display Mode Overview There are 3 different Speed Display screens that you can move between by using the Forward Back arrows at the bottom of the screen or by swiping left or right. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 71 This screen displays the absolute top speed reached until you press the Reset button at the bottom of the screen. If you have set a Target Speed in the Speed Settings, it will be displayed in grey underneath the VMAX value. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_-...
  • Page 72 Speed Display Settings You can access the Speed Display settings by pressing the Settings button at the bottom left of the screen and selecting Speed. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 73: Decimal Places

    You can adjust the number of decimal places displayed for speed values across all the Speed displays. You can choose between 0, 1 (default) and 2 decimal places. Tap the button to cycle through the options. Speed Display Smoothing https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 74: Avg Mode

    Distance screen. The Distance Display setting will toggle between Feet/Miles (if the Distance unit is set to feet in the General Settings) or will toggle between Metres/Kilometres (if the Distance unit is set to metres in the General Settings) https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 75 Enabling one, or both, of the alerts will set the target speed and also allow you to access the sub-menu where you can define the target speed condition by pressing the target sped value and then using the presented keypad. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_-...
  • Page 76 Note: Speed can be entered up to 1 decimal place. Reset Selecting the Reset button at the bottom right of the screen will reset all results shown on the current screen. When pressed, the LEDs will briefly flash green twice. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Speed_Display_Mode_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 77 This page contains the settings menu information for FW version 1.5 on VBOX Touch. You find the VBOX Touch Settings menu by selecting the mode you want to use and pressing the Settings button at the bottom left of the display mode screen. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 78: Mode Settings

    Mode Settings The first option on the Settings screen depends on which Display Mode you are using. You can find more information on these on the page for each specific Display mode. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 79: General Settings

    This setting allows you to change the distance units between metres and feet. Changing the distance units will affect all visual distance parameters on all screens, unit labels will change and all distance values and results will be automatically recalculated accordingly. Press the button to change the units. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 80 SD card) from test history screens. Options are either text format (.txt, default) or comma-separated values format (.csv). Screen Brightness You can manually adjust the screen brightness between 5 levels, with 1 being the dimmest and 5 being the brightest https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)

  • Page 81: Serial Port Settings

    LEDs will preview the brightness level. Serial Port Settings This menu contains serial output settings. Serial output is available on the top CAN/Serial port of the VBOX Touch, as shown in the image on the right-hand side of the Serial Port Settings. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 82 Baud Rate Displays the serial output baud rate, set as 115200 kbit/s. Diagnostics The Diagnostics menu is the final screen within the Settings menu, it displays basic GNSS receiver and VBOX information. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 83 3. The number of satellites will then be displayed as '00' and GPS status will show ‘SEARCHING FOR SATELLITES’ until the satellite lock has been acquired. It will take approximately 25 to 30 seconds for the unit to reacquire the satellite lock. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 84 VBOX Touch device. CAN Bus The CAN bus settings are the latest feature added to the VBOX Touch. You can read more about the CAN settings here. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)
  • Page 85 CAN Bus - VBOX Touch (v2/v3) https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ VBOX_Touch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/06_Settings_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/CAN_Bus_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 86 Pinouts - VBOX Touch (v2/v3) Right-side view of VBOX Touch Connector 1 - GNSS Antenna Function Centre RF Signal/Power for active antenna Chassis Ground https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Pinouts_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 87 Digital Input Connector that can be used for logging switch or event and brake triggers. Function Ground Digital Input 2 - Logging ON/OFF Digital Input 1 - Event/Brake Trigger Connector 3 - CAN/SERIAL (5-pin Lemo) Isolated CAN bus with active 120 ohm terminating resistors Function RS232 Tx RS232 Rx https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Pinouts_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 88 Function CAN High CAN Low Power Chassis Ground Connector 4 - CAN/SERIAL (5-pin Lemo) Isolated CAN bus with active 120 ohm terminating resistors Function RS232 Tx RS232 Rx CAN High CAN Low Power Chassis Ground https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Pinouts_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 89 Connector 5 - POWER (2-pin Lemo) Function Power Ground Chassis Ground https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Pinouts_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 90 Number of bytes Description Header $VBTse$ Message identifier as ASCII string. Total satellites Number of satellites used in solution irrespective of GNSS. Range (0, 255). Note: All eight bits are used. Time Ticks since midnight UTC. Range https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/RS232_Output_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 91 Unsigned integer, 0.01° per bit. Range (0, 35999). Altitude Signed integer, 0.01 m per bit. Range (-8388608, 8388607). Vertical velocity Signed integer, 0.001 m/s per bit. Range (-8388608, 8388607). Lateral acceleration Signed integer, 0.01 g per bit. Range (-32768, 32767). https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/RS232_Output_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 92 • Bits 5–8: Month Range (1, 12). • Bits 9–15: Years since 1980 Range (0, 128). Time since trigger event Unsigned integer, 0.000000001 seconds (i.e. 1 ns) per bit. Range (0, 429496729516). Checksum Standard Racelogic communications CRC calculation, See example below. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/RS232_Output_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 93 Lap Timing Data Format This is output when Lap Timing is selected within the Serial Port Settings menu. Protocol: 115200 Baud, no parity, 8 data bits, 1 stop bit Message format: $$LLTTnnnnttttllsssscc https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/RS232_Output_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 94 Unsigned integer, 0.001 s per bit. Lap number Unsigned integer. Stint time ssss Unsigned integer, 0.001 s per bit. Checksum Standard Racelogic communications CRC calculation, See example below. CRC Calculation example: s[n] is a string containing the message https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/RS232_Output_-...
  • Page 95 CRC:= CRC mod 65536; for i:=7 downto 0 do begin if ( (CRC and 32768)=32768) then begin CRC:= CRC *2 ; CRC:= CRC xor Polynomial; else begin CRC:= CRC *2 ; end; CRC:=CRC mod 65536; end; end; result:=CRC; https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ %2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/RS232_Output_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 96: Gnss Specifications

    Update Rate 25 Hz Maximum Velocity 1600 km/h Minimum Velocity 0.5 km/h Resolution 0.01 km/h Distance Accuracy 0.05 % (<50 cm per km) Units m or ft Resolution 1 cm Update Rate 25 Hz https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Technical_Specification_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 97 Accuracy (with SBAS)* H: 2 m CEP Update Rate 25 Hz Resolution 0.00185 m Acceleration Accuracy Maximum Update Rate 25 Hz Resolution 0.01 G Heading Resolution 0.01° Accuracy 0.3° Update Rate 25 Hz Trigger Brake Stops Accuracy ±20 cm https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Technical_Specification_- _VBOX_Touch_(v2%2F%2Fv3)

  • Page 98: Environmental And Physical

    -20°C to +60°C Storage Temperature -20°C to +80°C Mounting Richter mounting system or ¼” 20 TPI UNC Touch Screen Size 4.3” TFT Capacitive Touch Resolution 480 x 800 pixels TFT LCD Display Colours 262K colours (18 bit) https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Technical_Specification_- _VBOX_Touch_(v2%2F%2Fv3)
  • Page 99 Dimensions https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/ v3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/07_Technical_Properties_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Technical_Specification_- _VBOX_Touch_(v2%2F%2Fv3)

This manual is also suitable for:

Vbox touch v2Vbox touch v3

Table of Contents