Racelogic VBOX Touch V2 User Manual page 24

Hide thumbs Also See for VBOX Touch V2:

Table of Contents

Speed units used are dependent on what is selected within the

Note: If the start condition is 0 km/h, VBOX Touch will use the

incorrectly resetting within noisy satellite reception areas.

Accel Mode Overview

There are 3 different Acceleration screens which can be accessed by selecting the Forward

and Back

arrows on the bottom right of the screen or by swiping the screen left or right.

Accel - Primary Screen

This is the default acceleration screen and displays current/completed test information. If One Foot Rollout or Slope

Correction is enabled within the Accel Settings, the test header text will reflect the options.

User_Guide_%E2%80%93_VBOX_Touch_V2/05_Display_Modes_%E2%80%93_VBOX_Touch_V2/VBOX_Touch_V2_-

General Settings

Smoothed Speed Value

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Touch/VBOX_Touch_V2/

area.

to reset the test to avoid a test

_Accel_Mode

Table of Contents

Need help?

Do you have a question about the VBOX Touch V2 and is the answer not in the manual?

Vbtouch-v2