Intel Agilex Series Configuration User Manual page 197

5. Remote System Update (RSU)
683673 | 2021.10.29
4. On the Output Files tab, assign the output directory and file name.
5. Select the output file type.
Select the following file types for the Active Serial (AS) x4 configuration mode:
•
JTAG Indirect Configuration File (
•
Memory Map File (
•
Raw Programming File (
Figure 77. Output Files Tab: Creating Initial Flash Image
6. On the Input Files tab, click Add Bitstream, select the factory image
application image
a. Bitstream_1 is the bitstream for factory image.
b. Bitstream_2 is the bitstream for application image.
Send Feedback
)
.jic
)
.map
). Generating the
.rpd
Device Family
Configuration Mode
Output Directory
Output File Name
JTAG Indirect Configuration
Memory Map File (.map)
Raw Programming Data
.
.sof
file is optional.
.rpd
file and click Open. Repeat this step for the
.sof
Intel ® Agilex ™ Configuration User Guide
197