Intel Agilex Series Configuration User Manual page 184

b. Repeat the steps to regenerate the new
partition and click Edit. In the Edit Partition dialog box, under the Address Mode drop down list, select Block to
set the new End address value for the
c.
You can optionally Click File
The
.pfg
file to regenerate the programming file by running the following command:
quartus_pfg -c <configuration_file>.pfg
The file is actually an XML file which you can edit to replace absolute file paths with relative file paths. You cannot
.pfg
edit the
.pfg
5.5.1.2. Generating the Initial RSU Image Using
Follow these steps to generate the initial RSU image using
1. Run the following command to generate a
quartus_pfg -c factory.sof factory.rbf
quartus_pfg -c app1.sof app1.rbf
quartus_pfg -c app2.sof app2.rbf
2. Run the following command to generate a boot
quartus_pfg -c factory.sof boot.rbf -o rsu_boot=ON
3. On the File menu, click Programming File Generator.
4. Select Intel Agilex from the Device family drop-down list.
5. Select the configuration scheme from the Configuration mode drop-down list. The current Intel Quartus Prime only
supports remote system update feature in Active Serial x4.
6. On the Output Files tab, assign the output directory and file name.
7. Select the output file type.
Select the following file types for AS x4 configuration mode:
•
Raw Programming File (
Intel ® Agilex ™ Configuration User Guide
184
Save As .. to save the configuration parameters as a file with the
file contains your settings for the Programming File Generator. After you save the
file for other reasons. You can open and edit the
.rbf
.rbf
)
.rpd
file. On the Configuration Device tab, select the
.jic
.
FACTORY_IMAGE
in the Programming File Generator.
.pfg
Files
file:
.rbf
file from a factory or application image file (
file from a factory image file (
.rbf
5. Remote System Update (RSU)
683673 | 2021.10.29
FACTORY_IMAGE
extension.
.pfg
, you can use this
.pfg
).
.sof
)
.sof
Send Feedback