Kyocera KM-4230 User Manual page 74

Network Printing in a Windows Environment
5
In Administration mode of Printer Management Utility, click
Configuration
Setting
machine.
❍ Enable NetWare: Select "Enable".
❍ Frame Type:
❍ Bindery/NDS:
❍
Print Server Name:
❍
Print Server Password:
❍ Preferred NDS Context:
❍
Preferred NDS Tree:
❍
Print Queue Scan Rate:
❍ Mode:
6
To apply the settings, restart this machine (turn it off, then on again).
7
Use the NetWare Server console to load MONITOR.NLM.
8
Select the connection information, and in the active connection
column, check that the PServer that you created is connected.
in the sub-menu that appeared after clicking
on the "Network" tab, and then specify the settings for this
Select "Auto Detect". (Selects the frame type
according to the network environment.)
Select "NDS".
Print server name created in step 4
Set only if set on the NetWare Server.
Name of context node connecting the PServer
Name of the tree to which PServer logs on
Enter "1". (Change as necessary.)
Select "PServer".
6
NetWare
Common
6-19