Kyocera KM-4230 User Manual page 189

11
11.1.4 Store to Memory
If "Store to Memory" is specified and a job is printed, the job is temporarily
stored in this machine's memory and is not printed until its storage is
cancelled from this machine's control panel.
The data held in the memory is cleared when this machine is turned off.
Setting the printer driver
1
In the printer driver setup dialog box, click the "Job Management" tab.
2
Select "Store to Memory" from the
Operations on this machine
1
From the control panel, touch [Job Control], then [Hold Job] to display
the stored job.
2
Select the job you wish to print, and then touch [OK].
The job status changes to "Waiting Print", and the job is queued to be
printed.
For details, refer to the User's Manual of this machine.
You can check the status of the job from the Job Log screen.
11-4
Job Management
Store Job drop-down list.