Network Tab - Kyocera KM-4230 User Manual

12

12.6.5 Network Tab

Common Setting – TCP/IP
You can specify TCP/IP settings.
Procedure
➜
Click the "Network" tab, click
in the sub-menu that appeared.
TCP/IP
IP Address
Subnet Mask
Gateway Address
RAW Port Number
DHCP
DNS Configuration
DNS Server Address 1, 2, and 3
Note
To apply changes to the "IP Address", "Subnet Mask", "Gateway
Address", and "DHCP" parameters, restart this machine (turn it off,
then on again).
12-50
Using Printer Management Utility
Common Setting, and then click
Set the IP address for this machine.
Set the subnet mask of the network to which this
machine will be connected.
Set the default gateway address to which this machine
will be connected.
Default value: 9100
Set whether a DHCP server is used.
Settings: "Enable" or "Disable"
Set the DNS server addresses.
TCP/IP