Kyocera KM-4230 User Manual page 192

Job Management
11.1.7 Number of Jobs That Can Be Stored
A maximum of 50 jobs (specified using the copy, print, and scan functions)
can be stored on this machine.
Memo
Up to five scan jobs can be stored.
Up to 49 print jobs can be stored. The remaining job is used by any
operating copy or scan functions.
Jobs sent with the "Lock Job" setting selected are not included in the
50 job limit.
11.1.8 Identifying a Print Job by Name
You can assign names to jobs that are to be printed. The job names are
displayed on this machine's control panel and in Printer Management
Utility.
Setup procedure
1
In the printer driver setup dialog box, click the "Job Management" tab.
2
Enter the user name in the
31 alphanumeric characters).
3
Enter the job name in the
alphanumeric characters).
Setting the default user name
A default user name can be registered and used rather than entering a
user name for each job.
1
In the printer driver setup dialog box (refer to "Displaying the Printer
Driver Setup Dialog Box" on page 5-1), click the "Device Option
Setting" tab.
2
Enter the user name in the
(up to 31 alphanumeric characters).
User Name box under
Job Name box under
Default User Name
11
Job Owner (up to
Job Owner (up to 31
box under Job Owner
11-7