Network Printing in a Windows Environment
7
In Administrator mode of Printer Management Utility, from the
"Network" tab, select
and then specify the following settings for the printer controller.
❍
Enable NetWare: Select "Enable".
❍
Frame Type:
❍
Bindery/NDS:
❍
Print Server Name:Print server name created in step 4
❍
Preferred File Server:
❍
Print Queue Scan Rate:
❍
Mode:
8
Restart this machine (turn it off, then on again).
9
Use the NetWare Server console to display the print server screen,
and then check that the created printer is shown as "Waiting for Job"
for the connected printer (0).
Common Setting
–
Select "Auto Detect". (Select the frame type
according to the network environment.)
Select "Bindery".
Name of the file server running PServer
1 (Change as necessary.)
NPrinter
NetWare
Configuration,
6
6-13