Setting Device Options - Kyocera KM-4230 User Manual

Setting Up the Printer Driver
5.4

Setting Device Options

You can enable options installed on this machine from the printer driver.
Setting procedure
1
Display the printer driver setup dialog box (refer to "Displaying the
Printer Driver Setup Dialog Box" on page 5-1), and then click the
"Device Option Setting" tab.
2
From the
install, and then click the [Add] button.
Check that the device the you selected is displayed in the
Options
Note
If options installed on this machine are not set up in the "Device Option
Setting" tab, you will not be able to use them from the printer driver.
After an option is installed on this machine, be sure to set it up in the
"Device Option Setting" tab.
Installable Options
list.
list, select the device that you want to
5
Installed
5-7