Kyocera KM-4230 User Manual page 230

Using Printer Management Utility
Account Change Auto
Reset
User's Choice – User's Choice 2
You can specify settings for this machine.
Procedure
➜ Click the "System" tab, click
Choice 2
Priority Exit Tray
Intelligent Sorting
Criss Cross
Priority Device
2in1/4in1/Booklet
Copy Zoom
If set to "Yes", this machine determines that the user has
changed when the optional key counter is removed, and clears
the specified settings.
Settings: "Yes" or "No"
User's
in the sub-menu that appeared.
Set the output tray that is given priority when single staple finisher
is installed.
Copy: "Top Tray", "Elevator Tray", or "Third Tray"
Print: "Top Tray", "Elevator Tray", or "Third Tray"
Internet FAX: "Top Tray", "Elevator Tray", or "Third Tray"
Set the function that automatically selects Sort or Non-Sort.
Settings: "Yes" or "No"
Set the function that performs crisscross sorting, where the
direction of each copy of the document is stacked alternately when
paper in both the portrait and landscape orientations are loaded.
Settings: "Yes" or "No"
Set the print operation start time when a computer print job is
received.
Settings: "Printer" or "Copier"
Set the function that automatically selects the zoom ratio when a
2in1 or 4in1 setting is selected.
Settings: "Yes" or "No"
Choice, and then click
12
User's
12-35