Kyocera KM-4230 User Manual page 250

Using Printer Management Utility
Common Setting – LDAP
You can specify LDAP settings.
Note
In order for LDAP settings and network user authentication settings to
be specified on this machine at the same time, the LDAP server and
the server for network user authentication must be the same.
Procedure
➜ Click the "Network" tab, click
in the sub-menu that appeared.
LDAP
LDAP Server Address
SSL/TLS
Port Number
Common
Set whether to use the LDAP search function.
Settings: "Enable" or "Disable"
Enter the IP address or server name (host name) to set the
LDAP server address.
Settings: Alphanumeric characters only, the first character
cannot be a number for the server name
Set whether to perform communications with the LDAP server
using SSL/TLS.
Settings: "Enable" or "Disable"
Set the port number used to communicate with the LDAP
server.
Setting, and then click
12
LDAP
12-55