When This Machine And The Computer Are Connected Using A Parallel Connection; Installing The Printer Driver Using Plug And Play - Kyocera KM-4230 User Manual

Installing the Printer Driver
4.2 When This Machine and the Computer are
Connected Using a Parallel Connection
Note
To connect this machine to a computer using a parallel connection, the
optional local interface kit is required.
4.2.1

Installing the Printer Driver Using Plug and Play

For Windows NT 4.0, Plug and Play cannot be used to install the printer
driver. Refer to the procedure for installing the printer driver using the Add
Printer Wizard. If you are using Windows NT 4.0, exit the Add Printer
Wizard started by Plug and Play, click the "Add Printer" icon, and then
install the printer driver (refer to "Installing the Printer Driver Using the Add
Printer Wizard" on page 4-11).
For Windows 98
1
After using a parallel cable to connect this machine to the computer,
turn on the computer.
Note
Do not disconnect and connect the cable while the computer is
starting up.
2
Insert the CD-ROM into the computer's CD-ROM drive.
3
Turn this machine on.
The Add New Hardware Wizard dialog box appears.
4
Click the [Next] button.
5
Select
and then click the [Next] button.
6
Select
7
Specify the directory on the CD-ROM
(\Driver\English\Printer\Win9xME) that contains the printer driver for
Windows 98, and then click the [OK] button.
Search for the best driver for your device
Specify a location, and then click the [Browse] button.
4
(Recommended),
4-7