Password For Administrator Mode; About This Manual; Job Management - Kyocera KM-4230 User Manual

2
2.3

Password for Administrator Mode

A password (administrator access code) is required to enter the
Administrator mode described in this manual.
Ask the administrator of this machine for the password.
2.4

About This Manual

This manual is divided into chapters that describe how to connect the
device to a computer, printing functions, network printing functions,
scanning functions, box functions, job management functions, how to
specify machine settings from the computer, and other operations.
Depending on the operation that you want to perform, refer to the
corresponding page listed below.
Operation
Using this machine from a computer
(printing functions, scanning functions, and
machine setting from a computer)
Using this machine as a printer
Connecting this machine to a network and
performing network printing
Specifying printer settings with this machine
Using this machine as a scanner (scanning
functions)
Capturing images using software installed
on a computer (PC scanning functions)
Forwarding the image data stored in the
hard disk of this machine (Box functions)
Managing print and scan jobs
Specifying machine settings from the
computer
Using the BOX Utility
When problems occur
2-2
Before Using the Controller
Refer to
"3 Connecting to a Computer"
"4 Installing the Printer Driver"
"5 Setting Up the Printer Driver"
"6 Network Printing in a Windows
Environment"
"7 Specifying Printer Settings From the
Control Panel"
"8 Using the Scan Functions"
"9 Scanning Images Using TWAIN (PC
Scanning Function)"
"10 Using the Box Functions"

"11 Job Management"

"12 Using Printer Management Utility"
"13 Using the BOX Utility"
"14 Troubleshooting"