Hole Punching Documents - Kyocera KM-4230 User Manual

5
5.9

Hole Punching Documents

Note
The hole punch function is available only when optional folding finisher
is installed on this machine.
Setting procedure
1
Click the "Setup" tab.
2
Click the [Detail of Output Setting] button to display the detailed
settings dialog box.
3
From the
following settings.
❍
Punch: "OFF", "Top Side Punch", "Left Side Punch", or "Auto
Punch"
❍ Punch Holes: "2", "3", or "4"
Note
When using the hole punch function, always select "4" from the
Holes
No holes will be punched if "2" or "3" is selected.
5-16
Punch and Punch Holes
drop-down list.
Setting Up the Printer Driver
drop-down lists, select one of the
Punch