Accessing Printer Management Utility - Kyocera KM-4230 User Manual

Network Printing in a Windows Environment
Check with the network administrator that the DHCP server exists.
If the DHCP server does not exist, be sure to specify settings for
"IP Address", "Subnet Mask", and "Gateway Address".
If the settings for the IP address and other items have been
assigned using the DHCP server, there is a possibility that they
may be automatically changed. When the settings for the IP
address and other items are changed, if the IP address has been
used to specify a printer on the network for printing, there is a
possibility that printing may not be possible because this machine
cannot communicate with the network. If "DHCP" has been set to
"Enable", it is recommended that the IP address assigned to this
machine be fixed in the DHCP server settings.
4
To apply the settings, restart this machine (turn it off, then on again).
Turn this machine back on to enable the IP address.
6.3

Accessing Printer Management Utility

Setting the IP address for this machine enables you to access
Printer Management Utility.
Use your Web browser to directly access Printer Management Utility.
Access procedure
1
Start up the Web browser.
2
In the URL field, enter the IP address for this machine as shown below,
and then press the [Enter] key.
❍
http://<IP_address_for_the_copier>/
Example: If the IP address for this machine is 192.168.0.10
http://192.168.0.10/
The initial page of Printer Management Utility appears.
For further details on Printer Management Utility, refer to "12 Using Printer
Management Utility".
6
6-3