Kyocera KM-4230 User Manual page 118

Using the Scan Functions
Background Remove
Orientation
Margin
Erase
When "File (Scan To FTP Server)" is selected
Destination Name
Destination Server
URL Notification
URL Notification E-mail
Address
Scan mode settings (same as if "Scan to E-mail" is selected)
When "File (Scan To PC)" is selected
Destination Name
IP Address
Scan mode settings (same as if "Scan to E-mail" is selected)
When "File (Scan To HDD)" is selected
Destination Name
User Directory
Password
Set background remove.
Settings: "Auto", -5 (light) to +2 (dark)
Select the document direction.
Settings: "Auto", "Portrait", or "Landscape"
Select the position of the margin.
Settings: "Left Binding" or "Top Binding"
Select the method of erasing the specified location.
Settings: "No", "Left Erase", "Top Erase", or "Frame Erase"
When using the erase function, set the erase width in unit of
mm.
Enter the name of the temporary registration key (up to 12
characters).
Select the FTP server that is used for Scan to FTP Server. The
drop-down list displays FTP servers that were registered in
"Registering FTP Servers" .
Refer to "Registering FTP Servers" on page 8-48.
Set whether to notify information indicating the storage location
of the scanned data using e-mail.
Settings: "Yes" or "No"
Set the destination address for the URL notification. To register
multiple e-mail addresses, separate the addresses with a
comma.
Settings: Up to 1800 characters
Enter the name of the temporary registration key (up to 12
characters).
Enter the IP address of the destination computer (a computer
running an FTP application).
Enter the name of the temporary registration key (up to 12
characters).
Select the box that is used for Scan to HDD. The drop-down list
displays boxes that are registered.
Refer to "Creating User Boxes" on page 8-57.
Enter the password assigned to the selected user box (up to 64
characters). If the "PUBLIC" box is selected, a password is not
necessary.
8
8-31