Kyocera KM-4230 User Manual page 45

5
No. Item
8 Angle
9 Position
A preview of the settings is displayed.
5-12
Description
Specify the angle at which the text is printed on the page.
• Fixed Angle: Standard fixed angle provided by the printer
driver.
Settings: "Horizontal", "Vertical", "Diagonal" and "User
Setting"
• User Setting: When "User Setting" is selected, an arbitrary
angle can be set.
Settings: -180 to +180 degrees
(-: clockwise; 0: horizontal; +: counterclockwise)
Specify the position where the watermark is printed.
• Center: The watermark is printed in the center of the page.
• User Setting: The position is defined by the numeric values
entered in the "Horizontal" and "Vertical" boxes.
Setting value (Horizontal): -999 to 999 points
Setting value (Vertical): -999 to 999 points
(specified in 1-point increments; 72 points = 1 inch)
The "Position" setting defines the distance from the center. A
positive value in the "Horizontal" box is toward the right, and
a positive value in the "Vertical" box is upward.
Setting Up the Printer Driver