Connecting The Copier - Kyocera KM-4230 User Manual

13
13.6

Connecting the Copier

Connect the copier to access the image data on the copier hard disk.
Connection procedure
1
On the "Communicate" menu, click "Connect". You can also click
on the toolbar.
A dialog box used to select the destination appears.
2
If multiple copiers are registered, select the copier to be connected
from the
The Connecting MFP
that were entered in "Registering the Copier" (refer to "Registering the
Copier" on page 13-4).
3
Click the [Connect] button.
The connection is established and the boxes on the copier hard disk
appear.
4
Select the box containing the image data that you wish to view. If a
user box is selected, enter the password for the box in the
box.
5
Click the [Connect] button.
A list of image data in the selected box appears.
Disconnecting from the copier
➜
To disconnect from the copier, click "Disconnect" on the
"Communicate" menu, or click
13-6
Connecting MFP drop-down list.
drop-down list displays the registration names
Using the BOX Utility
on the toolbar.
Password