12
E-mail / Internet FAX – Send
You can specify mail transmission settings.
Procedure
➜
On the "Network" tab, click
in the sub-menu that appeared.
SMTP Server
Port Number
SMTP Connection
Timeout
Maximum E-mail Size
Binary Division
12-58
Using Printer Management Utility
E-mail / Internet
Set the IP address for the SMTP server.
Set the port number for the SMTP server.
(Normally, use the default value of 25.)
Set the connection timeout for the SMTP server.
Settings: 30 to 300 (seconds)
Set the maximum size of transmitted mails.
Settings: "No Limitation", 100 to 3000 KB (in units of 100 KB)
Set whether to divide the e-mail into multiple e-mails (binary
unit) when the e-mail size exceeds the maximum e-mail size.
Settings: "Yes" or "No"
For Scan to E-mail, refer to "Binary Division and Scanned File
Separation" on page 8-43.
For Scan to Internet FAX, refer to "Binary Division and
Scanned File Separation" on page 8-68.
FAX, and then click
Send