Kyocera KM-4230 User Manual page 15

3
Connection procedure
1
Make sure this machine is turned off.
2
Connect one end of the 10Base-T/100Base-TX cable to the 10Base-
T/100Base-TX port on this machine, and connect the other end of the
cable to the network hub.
This machine is now connected to the network.
3
When this machine is turned on, LED1 will light up.
❍ LED1: LINK
❍ LED2: ACT
3-2
LED 1
LED 2
Lights up if this machine is properly connected
to the network.
Blinks depending on the data reception status.
Connecting to a Computer