Connecting To A Computer; Using A Network Connection - Kyocera KM-4230 User Manual

Connecting to a Computer

3 Connecting to a Computer
In order to send print data from a computer to this machine, or to capture
data scanned using this machine, it is necessary to connect this machine
to the computer.
There are two ways to connect this machine to the computer. A network
connection can be used to connect this machine to the computer over a
network, or a parallel connection can be used to connect this machine
directly to the computer.
Network connection
Parallel connection
Note
To connect this machine to a computer using a parallel connection, the
optional local interface kit is required.
3.1

Using a Network Connection

To use this machine in a network environment, use a 10Base-T/100Base-
TX cable (Ethernet cable) to connect this machine to the network.
Important
Be sure to use a Category 5 or 5E cable that complies with the
10Base-T/100Base-TX standard.
Always use a 10Base-T/100Base-TX cable that is shielded. Failure to
do so may result in radio frequency interference.
Use an Ethernet cable to connect this machine to a network.
Use a parallel cable to connect this machine directly to the
parallel port of a computer.
3
3-1