Lpr Printing (Windows 2000/Xp/Nt 4.0/Server 2003); Operations On This Machine; Printer Driver Settings - Kyocera KM-4230 User Manual

6
6.5 LPR Printing (Windows 2000/XP/NT 4.0/Server
2003)
The LPR print service is supported as standard in Windows 2000/XP/NT
4.0. TCP/IP is used as the network protocol.
6.5.1

Operations on This Machine

Specify the IP address for this machine. For the setting procedure, refer
to "Setting the IP Address for This Machine" on page 6-2.
6.5.2

Printer Driver Settings

For Windows 2000/XP/Server 2003
1
For Windows 2000, click the [Start] button, point to "Settings", and then
click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
2
Right-click the icon of the installed printer, and then click "Properties".
3
On the "Ports" tab, click the [Add Port] button.
4
In the
then click the [New Port] button.
5
When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
6
In the
machine, and then click the [Next] button.
7
Select Custom, and then click the [Settings] button.
8
Select LPR, enter "Print" in the
[OK] button.
9
Click the [Next] button, and then click the [Finish] button to apply the
setting.
6-6
Available Printer Ports
Name of printer or IP address
Network Printing in a Windows Environment
list, select Standard TCP/IP
box, enter the IP address for this
Queue Name
Port, and
box, and then click the