Performing Forward To Ftp Server Operations; Flow Of Forwarding Operation - Kyocera KM-4230 User Manual

10
10.9

Performing Forward to FTP Server Operations

The image data in the box on the hard disk of this machine is forwarded
to a specified folder on the FTP server.
Note
To perform Forward to FTP Server operations, a network environment
with an FTP server is required.

10.9.1 Flow of Forwarding Operation

Procedure
1
Using Printer Management Utility, register FTP servers (up to five).
"Registering FTP Servers" on page 8-48
2
If "Use Proxy" was set to "Yes" in the FTP Server Registration page,
set the proxy server.
"Setting the Proxy Server" on page 8-51
3
Using Printer Management Utility, perform one-touch key registration
or temporary key registration.
"Registering Destinations in Advance" on page 8-25
4
Using this machine's control panel, select the files to be forwarded.
"Selecting the File to be Forwarded" on page 10-4
5
Using this machine's control panel, specify the forward destination of
the image data.
"Specifying the Forward Destination" on page 10-5
6
On this machine's control panel, press the [Start] key.
The image data in the box is forwarded to the FTP server.
If a URL notification destination is specified, information indicating the
storage location of the image data is sent by e-mail.
10-14
Using the Box Functions