Abnormal Noise At Pickup From The Multi-Purpose Tray - Canon imageRUNNER 1750 Series Service Manual

■ Abnormal noise at pickup from the Multi-purpose Tray

[Location]
Gear of the Right Cover Unit
[Cause]
Depending on the position to secure the lower belt for securing the Right Door, the belt
cannot be fitted into the escape hole but Z-folded when closing the Right Cover Unit, which
pushes the Right Door out and the gear at the Right Door side is not fully engaged with the
gear at the machine side, resulting in abnormal noise.
[Condition]
When reattaching a belt of the Right Cover Unit
[Field Remedy]
Be sure to secure the lower belt to the Right Cover Unit as follows.
Front side: Check that the belt is fitted into the escape hole when closing the Right Cover
Unit.
Rear side: Hold the belt to avoid displacement by securing the screw so that the belt is
secured almost parallel or facing slightly downward.
6
Troubleshooting > Troubleshooting items > Image Failure > Abnormal noise at pickup from the Multi-purpose Tray
6 Troubleshooting > Troubleshooting items > Image Failure > Abnormal noise at pickup from the Multi-purpose Tray
6-10
Escape hole
F-6-11
6-10