Canon imageRUNNER 1750 Series Service Manual page 192

4
Disassembly/Assembly > Image Formation System > Removing the Main Drive Unit > Procedure
CAUTION:
When assembling the Registration Clutch, be sure to align the cut-off [1] of the clutch
with the protrusion [2] of the Drive Unit
[2]
5) Remove the Drive Unit [1].
• 6 Screws [2]
x6
[2] [1]
4 Disassembly/Assembly > Image Formation System > Removing the Main Drive Unit > Procedure
[1]
F-4-144
[2]
F-4-145
CAUTION:
Be sure to fit the bearing [1] of the Drive Unit into the hole [2] of the plate on the host
machine side when assembling.
[2]
4-74
[1]
F-4-146
4-74