Removing The Multi-Purpose Tray Separation Pad; Preparation; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Pickup Feed System > Removing the Multi-purpose Tray Separation Pad > Procedure

Removing the Multi-purpose Tray Separation Pad

■ Preparation

1) Remove the Multi-purpose Tray Pickup Roller.(Refer to page 4-88)

■ Procedure

● Disassembling Procedure
CAUTION:
Be sure not to touch the surface of the pad when disassembling/assembling.
4 Disassembly/Assembly > Pickup Feed System > Removing the Multi-purpose Tray Separation Pad > Procedure
1) Lower the Multi-purpose Tray Pickup Tray [1], release the 2 bosses [2] of the Multi-purpose
Tray Separation Pad, and then remove the Multi-purpose Tray Separation Pad [3].
● Assembling Procedure
1) Install the Multi-purpose Tray Separation Pad [1] by aligning the 3 protrusions [A] of the
new Multi-purpose Tray Separation Pad with the 3 grooves [B] of the Separation Pad
Holder.
F-4-195
[2]
[3]
[1]
[1]
[A]
[B]
4-91
F-4-196
F-4-197
4-91