Canon imageRUNNER 1750 Series Service Manual page 195

4
Disassembly/Assembly > Image Formation System > Removing the Hopper Unit > Procedure
CAUTION:
When installing the Hopper Unit, be sure not to spill toner from the Toner Supply Mouth
[1] and the Toner Open/Close Shutter [2].
[2]
CAUTION:
When installing the Hopper Unit with toner inside, be sure to install it after removing the
Support Column Cover. There is a high possibility of toner scattering during the work if
it is not removed.
Removing the Support Column Cover (Refer to page 4-32)
[2]
x4
[4]
[4]
4 Disassembly/Assembly > Image Formation System > Removing the Hopper Unit > Procedure
[1]
F-4-154
[4]
[4]
[3]
[1]
F-4-155
2) Install the High Voltage Upper Guide [1].
• 1 Boss [2]
• 4 Hooks [3]
[1]
3) Install the Reverse Tray [1].
• 3 Hooks [2]
[2]
4-77
[2]
[3]
[3]
[3] [3]
F-4-156
[2]
[1]
F-4-157
4-77