Adjustment/Cleaning; Report Settings; Copy Settings - Canon imageRUNNER 1750 Series Service Manual

Adjustment/Cleaning

Item
Transfer Roller Cleaning Press [Start] to start cleaning.
Drum Cleaning Press [Start] to start cleaning.
Fixing Unit Cleaning Press [Start] to start cleaning.
Press [Cleaning Sheet Print] to start printing the cleaning sheet.
Feeder Cleaning Press [Start] to start cleaning.
Special Mode M Standard*, Low, High
Special Mode N Auto*, Manual (Medium, High), Off
Special Mode O On, Off*
Special Mode P Off*, Medium, High
Special Mode G On, Off*
Special Mode S On, Off*
Auto Adjustment for Dirty Feeder On*, Off
Special Mode E On, Off*
Special Mode F Off*, MODE1, MODE2, MODE3
Initialize After Replacing Drum Select [Yes] or [No]. (This function is used only when the drum unit
needs to be replaced.)
Setting Description
T-10-5

Report Settings

*1 Indicates items that are available only when the optional Super G3 Fax Board-AJ1 (standard
equipped for the imageRUNNER 1750iF/1740iF/1730iF) is attached to the machine.
Item Setting Description
Settings
TX Report On, For Error Only*
Report With TX Image: On*, Off
Off
Activity Report Auto Print: On*, Off
Send/Receive Separate: On, Off*
Daily Activity Report Time: On, Off*
RX Report On, For Error Only, Off*
Fax Activity Report*1 Auto Print: On, Off*
Send/Receive Separate: On, Off*
Daily Activity Report Time: On, Off*
Print List
Address Book List One-touch Buttons, Address Book: Yes, No
User's Data List Yes, No

Copy Settings

Item Setting Description
Standard Settings Store, Initialize
Initialize Copy Settings Yes, No
Appendix > List of User Mode > Copy Settings
T-10-6
T-10-7
Appendix > List of User Mode > Copy Settings
XVI
XVI