Canon imageRUNNER 1750 Series Service Manual page 323

4) Remove the Upper Controller Cover [1].
• 7 Screws [2]
• 4 Hooks [3]
[2]
x7
[3]
[2]
[3]
[2]
NOTE:
If a Fax Box Unit is installed, remove it.
5) Remove the Lower Controller Cover [1].
• 2 Screws [2]
• 2 Hooks [3]
x2
[2]
9
Installation > Copy Card Reader-F1 > Installation Procedure > Removing the Covers
[3] [1]
[2]
[3]
F-9-44
[1]
[3] [3] [2]
F-9-45
9 Installation > Copy Card Reader-F1 > Installation Procedure > Removing the Covers
6) Open the Right Door Unit [1], and open the DADF Unit [2].
[1]
7) Remove the Reader Right Rear Cover [1].
• 1 Screw [2] (The removed screws will be used in "Installing the Card Reader Kit" step 12.)
[2]
9-15
[2]
F-9-46
[1]
F-9-47
9-15