Removing The Copyboard Glass; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Original Exposure/Feed System > Removing the Copyboard Glass > Procedure

Removing the Copyboard Glass

■ Procedure

CAUTION:
• Place the removed Copyboard Glass on a cloth, etc. to avoid damaging the bottom
sheet.
• When removing the Copyboard Glass, take care not to touch the glass surface.
• If the surface becomes dirty, clean it with lint free paper.
4 Disassembly/Assembly > Original Exposure/Feed System > Removing the Copyboard Glass > Procedure
1) Open the ADF Unit [1].
2) Remove the Glass Retainer Plate [2].
• 2 Screws [3]
3) Remove the Copyboard Glass [1].
F-4-61
[3]
x2
[1] [2]
F-4-62
[1]
F-4-63
4-40
4-40