Major Components In Image Formation System - Canon imageRUNNER 1750 Series Service Manual

2
Technical Explanation > Image Formation System > Basic Configuration > Major Components in image formation system

■ Major Components in image formation system

The following shows major component parts in image formation system:
[14]
[13]
[12]
2 Technical Explanation > Image Formation System > Basic Configuration > Major Components in image formation system
[1] [2] [3] [4]
[5]
[6]
[7]
[8]
[11] [10] [9]
F-2-63
Name
[1] Drum Unit A unit consists of the Photosensitive Drum, Primary
Charging Roller, etc.
[2] Brush Roller To rotate by engaging with the Primary Charging Roller
to clean the Primary Charging Roller.
[3] Primary Charging Roller To rotate by engaging with the Photosensitive Drum to
make the surface of Photosensitive Drum negatively-
charged.
[4] Cleaning Blade To remove residual toner on the surface of
Photosensitive Drum.
[5] Waste Toner Feed Screw To feed toner that was collected by the Cleaning Blade
into the Waste Toner Box.
[6] Photosensitive Drum To create image on the surface of Photosensitive Drum.
[7] Static Eliminator To make the back side of paper negatively-charged to
separate the paper from the Photosensitive Drum.
[8] Transfer Roller To make the back side of paper positively-charged to
transfer toner on the paper.
[9] Developing Cylinder To transfer toner in the Developing Assembly on the
Photosensitive Drum.
[10] Developing Assembly A unit consists of the Developing Cylinder, Developing
Blade, etc.
[11] oner Feed Screw To fill toner that was supplied from the Sub Hopper into
the Developing Assembly
(Inside Developing
Assembly)
[12] Toner Feed Screw To feed toner that was supplied from the Toner Bottle
into the Developing Assembly.
(Inside Hopper)
[13] Hopper Assembly To accumulate toner supplied from the Toner Bottle.
[14] Toner Container A toner-filled container for toner supply
2-41
Function
T-2-26
2-41