Download; Clear; Configuration - Canon imageRUNNER 1750 Series Service Manual

#DOWNLOAD

■ Download
The following parts of this unit can be upgraded by executing download mode using the
service support tool (UST)
(for more information, see the "Software to Be Upgraded and Upgrading Method"(page
6-11).):
Main unit
ROM mounted on the main controller PCB (BOOT+PROGRAM)
ROM mounted on the DC controller PCB (DCON)
Accessory
ROM mounted on the finisher controller PCB(FIN_CON)

#CLEAR

■ Configuration

Group Item
TEL & USER Clears all user-registered and -set areas of telephone
DATA registration data and user data.
(Telephone registration refers to the registration of codes on
one-touch dialing, abbreviated dialing, and group dialing.)
SERVICE DATA Clears theservice data. User data is not cleared.
COUNTER Clears the maintenance counter, parts counter and mode-
specific counters. Initializes the counter (numerator) in the
system dump list.
SOFT-CNT Not used
TYPE Initializes user data and service data to suit specified destination
settings.
HIST ACTIVITY Initializes the activity report
ACCOUNT Clears print histories.
JAM Clears the jam history.
ERR Clear the error (error code) history.
ALARM Clears the alarm history.
ENVIROMENT Initializes the enviroment log data.
CARD Clears department management information held in the
controller before the card reader is demounted.
ERR E719 Clears card reader errors.
PWD Clears the system administrator's password.
FILE SYSTEM Not used
8
Service Mode > Details of Service Mode > #CLEAR > Configuration
Description
8 Service Mode > Details of Service Mode > #CLEAR > Configuration
Group Item
FORMAT USB MEMORY Format the USB memory.
LICENSE DRIVE Clears the drive for license file.
FMT-SD 512 Format the 512MB SD card.
1024 Format the 1204MB SD card.
2048 Format the 2048MB SD card.
CA-KEY Initializes an installed CA certification. (Displayed only after
activation of the e-RDS function.)
ERDS-DAT The settings related to e-RDS are cleared to the factory settings.
(Displayed only after activation of the e-RDS function.)
DEPT_USER_ Turns off the department-based ID management and user
CLEAR management functions.
SYSTEM_ Clears the system management identification number.
INFO_CLEAR
ENGIN ERRCLR Clears the engine errors.
BKRAMCLR Clears the engine backup RAM.
TNRINST Supplies toner from the toner cartridge to the developing
assembly.
TONER- SET Cancels the operation to clear toner supply and toner stirring
INSTALLED performed at installation.
Use this item when canceling the below CLEAR operation after
executing it.
CLEAR Clears toner supply and toner stirring performed at installation.
Toner supply and toner stirring are performed when the power is
turned ON next time.
Do not use it in the normal operation since toner scattering
inside the machine may occur when it is used 5 times or more.
ALL Clears user and service data (except for some scan parameters
and print parameters), and the counter setting/registration data
in the system dump list, except for the print count.
8-52
Description
T-8-62
8-52