Canon imageRUNNER 1750 Series Service Manual page 208

4
Disassembly/Assembly > Pickup Feed System > Removing the Multi-purpose Tray Pickup Roller > Procedure
● Assembling Procedure
1) Install the Pickup Roller [1] by aligning the protrusion [A] of the new Pickup Roller with the
groove [B] of the Pickup Roller Holder.
• 2 Pickup Roller Holders [2]
[2]
2) Install the Pickup Roller Cover [2] by aligning the 2 grooves [A] of the Pickup Tray Cover
with the 2 shafts [1] of the Pickup Roller Cover.
[A]
[1]
4 Disassembly/Assembly > Pickup Feed System > Removing the Multi-purpose Tray Pickup Roller > Procedure
[B]
[A]
[2]
[1]
F-4-192
[2]
F-4-193
3) Close the Multi-purpose Tray Pickup Tray [1].
4-90
[1]
F-4-194
4-90