4
Disassembly/Assembly > Image Formation System > Removing the Hopper Unit > Procedure
4) Install the High Voltage Main Guide [1].
• 1 Boss [2]
• 6 Hooks [3]
[2]
CAUTION:
When assembling the High Voltage Main Guide, be sure that the 7 Contact Springs [1]
are in contact with the [A] part of the High Voltage Lower Guide.
[A]
[A]
4
Disassembly/Assembly > Image Formation System > Removing the Hopper Unit > Procedure
[3]
[1]
[3]
F-4-158
[1]
[1]
F-4-159
5) Install the Laser Scanner Unit.
6) Install the HVT PCB.
7) Install the Delivery Inner Cover.
8) Install the Inner Rear Cover.
9) Install the Left Inner Cover.
10) Install the Right Inner Cover.
11) Install the Right Front Cover.
12) Install the Fixing Assembly.
13) Install the Front Cover.
14) Install the Developing Assembly.
15) Install the Drum Unit.
16) Install the Waste Toner Container.
17) Install the Toner Cartridge.
18) Install the Left Cover.
19) Install the Delivery Outer Cover.
20) Install the Rear Cover.
4-78
4-78