Removing The Fixing Drive Unit; Preparation; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Fixing System > Removing the Fixing Drive Unit > Procedure
2) Lock the 2 Fixing Lock Levers [1], and secure the Fixing Assembly [2].
[1]
3) Close the Right Door Unit.
4 Disassembly/Assembly > Fixing System > Removing the Fixing Drive Unit > Procedure
[2] [1]
F-4-165

Removing the Fixing Drive Unit

■ Preparation

1) Remove the Rear Cover.(Refer to page 4-24)
2) Remove the Right Rear Cover.(Refer to page 4-26)
3) Remove the Waste Toner Container.(Refer to page 4-67)
4) Remove the Drum Unit.(Refer to page 4-68)
5) Remove the Main Drive Unit.(Refer to page 4-73)
6) Remove the Fixing Assembly.(Refer to page 4-79)

■ Procedure

1) Disconnect the 2 Connectors [1] and remove the 2 Wire Saddles [2] and the Reuse Band [3].
[2]
x2
x2
[1]
4-81
[3]
F-4-166
4-81