Canon imageRUNNER 1750 Series Service Manual page 326

7) Install the Cord Guide [1], and remove the Cord Guide Cover [2].
8) Install the Card Reader Harness [1].
• 1 Connector [2]
• 1 Wire Saddle [3]
• 2 Edge Saddles [4]
CAUTION:
When installing the Card Reader Harness, be sure to connect the connector [2] without
Ferrite Core [1] to the Card Reader Unit.
[2]
9
Installation > Copy Card Reader-F1 > Installation Procedure > Installing the Card Reader Kit
[1]
[2]
F-9-55
[1]
F-9-56
9 Installation > Copy Card Reader-F1 > Installation Procedure > Installing the Card Reader Kit
[3]
x3
9) Pass the Card Reader Harness [1] through the Cord Guide [2], and install the Cord Guide
Cover [3].
[4]
[1]
[2]
F-9-57
[1] [2]
[3]
F-9-58
9-18
9-18