Canon imageRUNNER 1750 Series Service Manual page 280

● #SCAN> FEEDER> ADJUST> DOCST
Adjusting the original stop position for ADF pickup (original tray pickup).
Delivering the original enables the setting. Be sure to press the OK key to deliver the original.
When changing the setting, input the setting on the main station service label.
The larger the value, the smaller the leading edge margin.
● #SCAN> FEEDER> ADJUST> LA-SPEED
Adjusting the original feeding speed in stream reading.
Use this mode to adjust the original feeding speed in stream reading mode.
The larger the setting, the faster the speed (the image reduced).
● #SCAN> FEEDER> ADJUST> LA-SPD2
Adjustment of original feed speed in backside stream reading mode
As the setting value is increased, the speed is increased (image is reduced).
● #SCAN> FEEDER> FUNCTION> MTR-CHK
Operation check for the ADF motor, etc.
Specify a paper feed mode to check passage of paper by the DF. Select #SCAN> FEEDER>
FUNCTION> MTR-ON to execute this.
0: Feed Motor (M11)
1: Delivery Reversal Motor (M12)
● #SCAN> FEEDER> FUNCTION> FEED-CHK
Checking the passage of paper for ADF.
Specify a paper feed mode to check passage of paper by the DF. Select #SCAN> FEEDER>
FUNCTION> FEED-ON to execute this.
0: 1-sided feed mode
1: 2-sided feed mode
2: not used
3: not used
● #SCAN> FEEDER> FUNCTION> SL-CHK
Checking the ADF solenoid.
Specify a solenoid to perform a solenoid check. Select #SCAN>FEEDER > FUNCTION > SL-
ON to execute this.
0: Pickup Solenoid (SL5)
1: Registration Solenoid (SL4)
2: Flapper Solenoid 1 (SL7)
3: Flapper Solenoid 2 (SL6)
4: Roller Release Solenoid (SL8)
8
Service Mode > Details of Service Mode > #SCAN > READER
8 Service Mode > Details of Service Mode > #SCAN > READER
● #SCAN> FEEDER> FUNCTION> SL-ON
Start of solenoid operation
Selecting 1 starts solenoid operation.
● #SCAN> FEEDER> FUNCTION> MTR-ON
Starting the motor operation.
Selecting 1 start motor operation.
● #SCAN> FEEDER> FUNCTION> FEED-ON
Checking the passage of paper with ADF.
Selecting 1 starts checking passage of paper by the ADF.
● #SCAN> FEEDER> OPTION> UNK-A5R
The setting to detect a custom paper size that is smaller than A4-R (LTR-R) by the ADF
original size detection
This is the setting whether to detect a custom paper size that is smaller than A4R (LTRR) as
A5R (STMTR) by the ADF original size detection.
0: Detected as custom paper size
1: Detected as A5R (STMTR)
8-31
8-31