Removing The Delivery/Reverse Unit; Preparation; Procedure - Canon imageRUNNER 1750 Series Service Manual

4
Disassembly/Assembly > Pickup Feed System > Removing the Delivery/Reverse Unit > Procedure

Removing the Delivery/Reverse Unit

■ Preparation

1) Remove the Fixing Assembly.(Refer to page 4-79)
2) Remove the Rear Cover.(Refer to page 4-24)

■ Procedure

1) Remove the Reverse Tray [1].
• 3 Hooks [2]
[2]
2) Disconnect the connector [1], and remove the Wire Saddle [2], the Edge Saddle [3] and the
2 screws [4].
x2
[4]
4 Disassembly/Assembly > Pickup Feed System > Removing the Delivery/Reverse Unit > Procedure
[1]
F-4-198
x2
[3] [2] [1]
F-4-199
3) While putting the connector [1] into the inside of the host machine, remove the Delivery/
Reverse Unit [2].
• 2 Bosses [3]
• 1 Hook [4]
[3] [4] [2]
4-92
[3]
[1]
F-4-200
4-92